5. Right Case Removal

Right Case Removal
1. Remove differential gear assembly (1) from right case (2).





2. Remove bolt and then pull out VSS (3).





3. Remove input right bearing (1) stopper bolt (3) and plate (2).





4. Remove input right bearing (1) by using special tools.
Special Tool
(A): 09930-30104
(B): 09923-74510
5. Remove input shaft oil seal (1) by using special tools (combination of bearing remover and sliding shaft).
Special Tool
(A): 09930-30104
(B): 09923-74510





6. Also pull out countershaft right bearing cup (2) by using special tools.
Special Tool
(A): 09930-30104
(C): 09941-64511