Tie-Rod / Rack Boot Removal and Installation: Removal
- Remove steering gear box from vehicle referring to P/S GEAR BOX REMOVAL AND INSTALLATION .
- For ease of adjustment after installation, make marking (4) of tie-rod end lock nut position of tie-rod thread.
- Loosen tie-rod end lock nut (2) and remove tie-rod end.
- Remove boot wire and clip.
- Remove boot (3) from tie-rod (1).
Courtesy of SUZUKI OF AMERICA CORP.
- Unbend bent parts (3 places) (1) of tie-rod lock washer and remove tie-rod (2) from rack (3).
Courtesy of SUZUKI OF AMERICA CORP.