LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Aerio Base, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission) >> Repair Instructions >> Output Shaft Speed Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Shaft Speed Sensor Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect negative cable at battery.
  2. Disconnect output shaft speed sensor connector (2).
  3. Remove output shaft speed sensor (1) by removing its bolt.
    Fig 1: Removing Output Shaft Speed Sensor
    G04591875Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals