Control Rod Removal and Installation: Removal

Hoist vehicle and remove rear wheels.
To facilitate toe adjustment after reinstallation, put match marks (4) on washer (3) and on suspension frame (2).

Fig 1: Putting Match Marks On Washer And On Suspension Frame
Courtesy of SUZUKI OF AMERICA CORP.
Remove suspension frame cap (2). (for 2WD model)
Remove control rod No.2 (4) and No.1 (3) from suspension frame (1) and knuckle (5).

Fig 2: Removing Control Rod No.2 And No.1 From Suspension Frame And Knuckle
Courtesy of SUZUKI OF AMERICA CORP.