Tie-Rod End Removal and Installation: Removal

Hoist vehicle and remove wheel.
Remove split pin (1) and tie-rod end castle nut (2).

Fig 1: Removing Split Pin And Tie-Rod End Castle Nut
Courtesy of SUZUKI OF AMERICA CORP.
Using special tool, remove tie-rod end from knuckle.
Special Tool

(A): 09913-65210

Fig 2: Removing Tie-Rod End From Knuckle
Courtesy of SUZUKI OF AMERICA CORP.
To facilitate adjustment after installation, put a mark (2) on tie-rod thread indicating position of tie-rod end lock nut (3). Then loosen lock nut and remove tie-rod end (4) from tie-rod (1).

Fig 3: Removing Tie-Rod End From Tie-Rod
Courtesy of SUZUKI OF AMERICA CORP.