Scan Tool Data
As the data values given below are standard values estimated on basis of obtained from the normally operating vehicle by using a scan tool, use them as reference value.
NOTE:
When checking the data with the engine running at idle or racing, be sure to shift M/T gear to the neutral gear position and A/T gear to the "Park" position and pull the parking brake fully. Also, if nothing or "no load" is indicated, turn OFF A/C, all electric loads and all the other necessary switches.
SCAN TOOL DATA REFERENCE
| Scan Tool Data | Normal Condition / Reference Value |
|---|---|
| Back Up Volt | 27.0 - 33.0 V |
| Battery Voltage | 10.6 - 16.5 V |
| System ID | 4 ch or 6 ch |
| Driv Air Bag Ini Res | 2.0 - 3.4 OHMS |
| Pass Air Bag Ini Res | 1.8 - 2.6 OHMS |
| Driv Preten Ini Res | 1.8 - 2.7 OHMS |
| Pass Preten Ini Res | 1.8 - 2.7 OHMS |
| Driv Sidebag Ini Res | 1.8 - 2.4 OHMS |
| Pass Sidebag Ini Res | 1.8 - 2.4 OHMS |