Parking Brake Cable Removal and Installation: Installation

Install it by reversing removal procedure, noting the following points.

• Install clamps properly referring to PARKING BRAKE CABLE CONSTRUCTION .
• Tighten bolts and nuts to specified torque referring to PARKING BRAKE CABLE CONSTRUCTION .

  Tightening torque 

  Parking brake lever bolt: 23 N.m (2.3 kg-m, 17.0 lb-ft) 

  Parking brake cable clamp bolt: 11 N.m (1.1 kg-m, 8.0 lb-ft) 

• Adjust parking brake cable. Refer to PARKING BRAKE INSPECTION AND ADJUSTMENT .
• Check brake drum for dragging and brake system for proper performance. After removing vehicle from hoist, brake test should be performed.