Clutch Pedal Position (CPP) Switch Circuit Check

CLUTCH PEDAL POSITION STEP ACTION REFERENCE

Step	Action	YES	NO
1	Clutch pedal position switch circuit check  Disconnect connector from cruise control module with ignition switch OFF. Check for proper connection to cruise control module at terminal "E52-9". If OK, check for resistance between terminal "E52-9" and ground under each condition in the following. Clutch pedal position switch circuit specification  Clutch pedal released: Infinity  Clutch pedal depressed: Continuity  Is check result satisfactory?	Clutch pedal position switch circuit is OK.	Go to Step 2.
2	Clutch pedal position switch position check  Check clutch pedal position switch for installation position referring to CLUTCH PEDAL POSITION (CPP) SWITCH FOR CRUISE CONTROL REMOVAL AND INSTALLATION . Is check result satisfactory?	Go to Step 3.	Adjust CPP switch position.
3	Clutch pedal position switch check  Disconnect connector from clutch pedal position switch. Check for proper connection to clutch pedal position switch at all terminals. If OK, check clutch pedal position switch for operation referring to CLUTCH PEDAL POSITION (CPP) SWITCH FOR CRUISE CONTROL INSPECTION . Is this switch in good condition?	"BLU" or "BLK" circuit is open or short.	Replace CPP switch.