Fail-Safe Table
When any of the following DTCs is detected, ECM enters fail-safe mode as long as malfunction continues to exist but that mode is canceled when ECM detects normal condition after that.
FAIL-SAFE TABLE
| DTC No. | Trouble Area | Fail-Safe Operation |
|---|---|---|
| P0102 P0103 |
MAF SENSOR |
|
| P0112 P0113 |
IAT SENSOR | Each control is performed on the basis of 22.1°C intake air temp. |
| P0117 P0118 |
ECT SENSOR | Each control is performed on the basis of 29.9 °C engine coolant temp. |
| P0122 P0123 |
TP SENSOR | Each control is performed on the basis of 124.5° throttle valve opening. |
| P0462 / P0463 | FUEL LEVEL SENSOR | Each control is performed in the basis of full fuel level. |
| P0500 | VEHICLE SPEED SENSOR | Air flow of IAC valve is limited. |
| P2227 P2228 / P2229 |
BAROMETRIC PRESSURE SENSOR (EVAP LEAK CHECK PRESSURE SENSOR) | Each control is performed based on 760 mmHg barometric pressure. |