DTC Troubleshooting
DTC DIAGNOSTIC TROUBLESHOOTING CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK . |
| 2 | Exhaust system visual inspection
Is it in good condition? |
Go to Step 3. | Repair or replace. |
| 3 | HO2S-2 output voltage check
Is check result satisfactory? |
Replace both exhaust pipe No.2 (built in three way catalytic converter) and exhaust manifold (Bank 2) (built in warm up three way catalytic converter) with new ones. | Check "RED/YEL" and "GRY/YEL" wires for open and short, and connections for poor connection. If wires and connections are OK, replace HO2S-2. |