Camshaft Position (CMP) Sensor Removal and Installation: Installation

Reference: IGNITION TIMING CHECK AND ADJUSTMENT

1. Install a new O-ring (2) with engine oil applied to CMP sensor (1).
   Fig 1: Identifying O-Ring And CMP Sensor

   Courtesy of SUZUKI OF AMERICA CORP.
2. Install CMP sensor (1) to camshaft (3).

   Fit the dog of CMP sensor coupling (2) into the slots of camshaft, when installing. The dogs of CMP sensor coupling are offset. Therefore, if the dogs can not be fitted into the slots, turn the CMP sensor shaft by 180 degree and try again.

   Fig 2: Identifying CMP Sensor, CMP Sensor Coupling And Camshaft

   Courtesy of SUZUKI OF AMERICA CORP.
3. Tighten CMP sensor bolt (3).
4. Connect CMP sensor coupler (2) to CMP sensor (1).
   Fig 3: Identifying CMP Sensor, CMP Sensor Coupler And CMP Sensor Bolt

   Courtesy of SUZUKI OF AMERICA CORP.
5. Install A/T fluid level gauge (1) and filler tube (2).
   Fig 4: Identifying A/T Fluid Level Gauge And Filler Tube

   Courtesy of SUZUKI OF AMERICA CORP.