Fuel Pressure Regulator Removal and Installation: Installation

Reverse removal procedure for installation noting the following.

• Use new O-ring.
• Apply thin coat of gasoline to O-ring to facilitate installation.
  Fig 1: Applying Thin Coat Of Gasoline To O-Ring

  Courtesy of SUZUKI OF AMERICA CORP.
• Tighten fuel pressure regulator bolts to specified torque.

  Tightening torque 

  Fuel pressure regulator bolt a: 11 N.m (1.1 kg-m, 8.0 lb-ft) 

  Fig 2: Identifying Fuel Pressure Regulator Bolts

  Courtesy of SUZUKI OF AMERICA CORP.
• With engine "OFF" and ignition switch "ON", check for fuel leaks around fuel line connection.