VSS Circuit Check
TEST PROCEDURE - VSS CIRCUIT
| Step |
Action |
YES |
NO |
| 1 |
Engine control module (ECM) DTC check
- Check DTC in ECM referring to DTC CHECK
.
Is DTC P0500 detected? |
Go to DTC P0500: Vehicle Speed Sensor
. |
Go to Step 2. |
| 2 |
Check VSS circuit for open
- Disconnect VSS connector "C20" and cruise control module connector "E132" with ignition switch OFF.
- Check for proper connection to VSS connector at "C20-1" terminal and cruise control module connector at "E132-1" terminal.
- If OK, check for continuity between terminals "C20-1" and "E132-1".
 Courtesy of SUZUKI OF AMERICA CORP.
Is check result satisfactory? |
Go to Step 3. |
"BLU/YEL" circuit is open. |
| 3 |
Check VSS circuit for short
- Check for resistance between "E132-1" terminal and body ground.
 Courtesy of SUZUKI OF AMERICA CORP.
Is resistance infinity? |
VSS circuit is OK. |
"BLU/YEL" circuit is short. |