LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Premium, 4WD >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC Clearance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Clearance

  1. With ignition switch OFF, connect OBD-II generic scan tool or SUZUKI scan tool to data link connector (DLC).
  2. Turn ignition switch ON.
  3. Erase DTC according to instructions displayed on scan tool. Freeze frame data is cleared with the DTC. Refer to scan tool operator's manual for further details.
  4. After completing the clearance, turn ignition switch off and disconnect scan tool from data link connector.
    NOTE: DTC and freeze frame data stored in ECM memory are also cleared in the following cases. Be careful not to clear them before keeping their record.
    • When power to ECM is cut off (by disconnecting battery cable, removing fuse or disconnecting ECM connectors)
    • When the same malfunction (DTC) is not detected again during 40 engine warm-up cycles, refer to "WARM-UP CYCLE " of ON-BOARD DIAGNOSTIC SYSTEM DESCRIPTION .
scientia non olet · About LEMON Manuals