Transmission Range Sensor (Shift Switch) Circuit Check
TEST PROCEDURE - TRANSMISSION RANGE SENSOR (SHIFT SWITCH) CIRCUIT
| Step |
Action |
YES |
NO |
| 1 |
Transmission range sensor (shift switch) circuit check
- Disconnect connector from cruise control module with ignition switch OFF.
- Check for proper connection to cruise control module at terminal "E132-9".
- If OK, connect ohmmeter between terminal "E132-9" and ground.
 Courtesy of SUZUKI OF AMERICA CORP.
- 4) Check for continuity under each condition in the following.
Transmission range sensor (shift switch) circuit specifications
Selector lever at "P" or "N" range: Continuity "R", "D", "3" or "L" range: Infinity
Is check result satisfactory? |
Transmission range switch circuit is OK. |
Go to Step 2. |
| 2 |
Transmission range sensor (shift switch) check
- Disconnect transmission range sensor (shift switch) connector.
- Check for proper connection to transmission range sensor (shift switch) at disconnected connector terminals.
- If OK, check transmission range sensor (shift switch) for operation referring to TRANSMISSION RANGE SENSOR INSPECTION AND ADJUSTMENT
.
Is check result satisfactory? |
"BLK/RED" or "BLK/YEL" circuit is open or short. |
Adjust or replace transmission range sensor (shift switch). |