HVAC Control Module Removal and Installation: Installation

Refer to HVAC CONTROL MODULE AND ITS CIRCUITS INSPECTION : Manual Type.

Refer to HVAC CONTROL MODULE AND ITS CIRCUITS INSPECTION : Automatic Type.

1. Install in reverse order of removal procedure, noting the following item.
   • When installing center garnish, align rubber bushing (1) with BCM installation hole (2) of instrument panel member (3).
     Fig 1: Identifying Rubber Bushing, BCM Installation Hole & Instrument Panel Member

     Courtesy of SUZUKI OF AMERICA CORP.
   • For vehicle with automatic A/C system, fit aspirator hose in inside air temperature sensor duct (1) of HVAC control module (2).
     Fig 2: Identifying Air Temperature Sensor Duct And HVAC Control Module

     Courtesy of SUZUKI OF AMERICA CORP.
   • Enable air bag system.

     Refer to ENABLING AIR BAG SYSTEM.