Front Wheel Speed Sensor Removal and Installation: Installation

Reference: FRONT WHEEL SPEED SENSOR INSPECTION 

1. Check sensor rotor referring to FRONT WHEEL SPEED SENSOR ROTOR ON-VEHICLE INSPECTION .
2. Install it by reversing removal procedure.
   CAUTION:

   • Do not pull wire harness or twist more than necessary when installing front wheel speed sensor (1).
   • Fit harness grommet to inner fender securely.

   Tightening torque 

   Front wheel speed sensor harness clamp bolt a: 10 N.m (1.0 kg-m, 7.5 lb-ft) 

   Front wheel speed sensor bolt b: 23 N.m (2.3 kg-m, 17.0 lb-ft) 

   Fig 1: Identifying Front Wheel Speed Sensor & Bolts

   Courtesy of SUZUKI OF AMERICA CORP.
3. Check that there is no clearance between sensor (1) and knuckle.
   Fig 2: Checking Clearance Between Sensor And Knuckle

   Courtesy of SUZUKI OF AMERICA CORP.