Sliding Roof Assembly Disassembly and Assembly: Assembly

Reverse disassembly procedure for assembly, noting the following point.

CAUTION: Match protrusion (2) of guide (3) and dent (1) in cable for completely closed position of sliding roof drive cable and match marks (holes (5)) for completely closed position of sliding roof motor assembly (4) and then install sliding roof motor assembly (4).

Apply butyl rubber sealant to contact surface "A" of the rear drip (6).

Fig 1: Identifying Sliding Roof Motor Assembly, Dent, Protrusion, Guide, Match Marks & Rear Drip
Courtesy of SUZUKI OF AMERICA CORP.