LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, RWD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnostic Information and Procedures >> DTC Check >> Reading DTC Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reading DTC Using SUZUKI Scan Tool

  1. Turn ignition switch OFF.
  2. Connect SUZUKI scan tool to data link connector (DLC).

    Special Tool 

    (A): SUZUKI scan tool 

    Fig 1: Identifying Suzuki Scan Tool
    G04722532Courtesy of SUZUKI OF AMERICA CORP.
  3. Read DTC according to instructions displayed on SUZUKI scan tool and write it down. Refer to SUZUKI scan tool operator's manual for further details.
  4. After completing the check, turn ignition switch OFF and disconnect SUZUKI scan tool from data link connector (DLC).
scientia non olet · About LEMON Manuals