Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Tie-rod end lock nut | 65 | 6.5 | 47.0 |
| Stabilizer ball joint nut | 26 | 2.6 | 19.0 |
| Stabilizer ball joint nut | 50 | 5.0 | 36.5 |
| Stabilizer bracket bolt | 23 | 2.3 | 17.0 |
| Strut nut | 90 | 9.0 | 65.0 |
| Strut support nut | 55 | 5.5 | 40.0 |
| Bracket bolt | 95 | 9.5 | 69.0 |
| Tower bar mounting bolt | 50 | 5.0 | 36.5 |
| Axle shaft drive flange bolt | 50 | 5.0 | 36.5 |
| Wheel speed sensor harness clamp bolt | 10 | 1.0 | 7.5 |
| Wheel speed sensor bolt | 23 | 2.3 | 17.0 |
| Bump stopper | 50 | 5.0 | 36.5 |
| Wheel bearing lock nut | 216 | 21.6 | 156.5 |
| Lock bearing lock screw | 1.5 | 0.15 | 1.1 |
| Front brake caliper bolt | 85 | 8.5 | 61.5 |
| Wheel nut | 100 | 10.0 | 72.5 |
| Wheel spindle nut | 50 | 5.0 | 36.5 |
| Ball stud nut | 60 | 6.0 | 43.5 |
| Tie-rod end nut | 40 | 4.0 | 29.0 |
| Front suspension arm front nut | 85 | 8.5 | 61.5 |
| Front suspension arm rear nut | 126 | 12.6 | 91.0 |
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION.