DTC Troubleshooting
DTC DIAGNOSTIC TROUBLESHOOTING CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK . |
| 2 | Battery voltage supply circuit check
Is voltage 10 - 14 V? |
Poor "E61-2" terminal connection or intermittent trouble. Check for intermittent referring to INTERMITTENT AND POOR CONNECTION INSPECTION . | "WHT" circuit open, short or "RADIO DOME" fuse blown. If wire and connections are OK, substitute a known-good ECM and recheck. |