Tightening Torque Specifications
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lb-ft | |
| Differential oil level/filler plug | 23 | 2.3 | 17.0 |
| Differential oil drain plug | 23 | 2.3 | 17.0 |
| Front mounting bracket bolt | 50 | 5.0 | 36.5 |
| Front mounting bolt | 85 | 8.5 | 61.5 |
| Rear mounting bolt | 85 | 8.5 | 61.5 |
| Rear mounting bracket bolt | 90 | 9.0 | 65.0 |
| Rear mounting bracket No.2 bolt | 55 | 5.5 | 40.0 |
| Front drive shaft flange bolt | 50 | 5.0 | 36.5 |
| Propeller shaft flange bolt | 50 | 5.0 | 36.5 |
| Front mounting R bolt | 85 | 8.5 | 61.5 |
| Drive bevel gear bolt | 85 | 8.5 | 61.5 |
| Front differential cover bolt (12 mm) | 85 | 8.5 | 61.5 |
| Front differential cover bolt (8 mm) | 23 | 2.3 | 17.0 |
| Front drive shaft case bolt | 50 | 5.0 | 36.5 |
NOTE:
The specified tightening torque is also described in the following. Front Differential Components
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION.