Front Door Glass Removal and Installation: Installation
Reverse removal procedure to install door glass noting the following points:
- Tighten glass attaching screws (1) to specified torque. Tighten front screw first, then rear screw.
Tightening torque
Glass attaching screw (front and rear) a: 2.5 N.m (0.25 kg-m, 1.8 lb-ft)
- When window becomes hard to raise and lower, adjust screws (1) to correct tilted glass as shown in the figure.
- Adjust equalizer of window regulator so that measurement A and B are equal.
- Secure door sealing cover (1) with adhesive (2).