LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, 4WD, Standard >> Repair and Diagnosis >> Transmission >> Transfer Case >> Diagnostic Information and Procedures >> DTC Clearance >> Without Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without Using SUZUKI Scan Tool

  1. Turn ignition switch to ON position.
  2. Using service wire (1), connect diagnosis switch terminal ("PNK" wire) (2) to ground terminal ("BLK" wire) (3) in diagnosis connector (4) more than 5 times at about 1 second interval within 10 seconds.
  3. Wait more than 9 seconds.
  4. Perform DTC Check  and confirm that DTC No. 12 is displayed.
    Fig 1: Identifying Service Wire, Diagnosis Switch Terminal, Ground Terminal & Diagnosis Connector
    G04722153Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals