LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, 4WD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Diagnostic Information and Procedures >> A/T System Check >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/T System Check: Notes

WARNING: This page is about a different variant/trim than selected.

Refer to the following items for the details of each step.

DIAGNOSTIC INFORMATION AND PROCEDURES REFERENCE

Step Action YES NO
1  Customer Complaint Analysis  
  1. Perform customer complaint analysis.

Was customer complaint analysis performed according to instruction? 		 Go to Step 2. Perform customer complaint analysis.
2  DTC/Freeze Frame Data Check, Record and Clearance  
  1. Check for DTC (including pending DTC)

Is there any DTC(s)? 		 Print DTC and freeze frame data or write them down and clear them by referring to DTC Clearance .
Go to Step 3.		 Go to Step 4.
3  Visual Inspection  
  1. Perform visual inspection.

Is there any faulty condition? 		 Repair or replace malfunction part.
Go to Step 11.		 Go to Step 5.
4  Visual Inspection  
  1. Perform visual inspection.

Is there any faulty condition? 		 Repair or replace malfunction part.
Go to Step 11.		 Go to Step 8.
5  Trouble Symptom Confirmation  
  1. Confirm trouble symptom.

Is trouble symptom identified? 		 Go to Step 6. Go to Step 7.
6  Recheck and Record of DTC / Freeze Frame Data  
  1. Recheck for DTC and freeze frame data referring to DTC Check .

Is there any DTC(s)? 		 Go to Step 9. Go to Step 8.
7  Recheck and Record of DTC / Freeze Frame Data  
  1. Recheck for DTC and freeze frame data referring to DTC Check .

Is there any DTC(s)? 		 Go to Step 9. Go to Step 10.
8  A/T Basic Check and A/T Trouble Diagnosis  
  1. Check and repair according to A/T BASIC CHECK  and A/T SYMPTOM DIAGNOSIS .

Are check and repair complete? 		 Go to Step 11. Check and repair malfunction part(s).
Go to Step 11.
9  Troubleshooting for DTC  
  1. Check and repair according to applicable DTC diag. flow.

Are check and repair complete? 		 Go to Step 11. Check and repair malfunction part(s).
Go to Step 11.
10  Check for Intermittent Problem  
  1. Check for intermittent problem.

Is there any faulty condition? 		 Repair or replace malfunction part(s).
Go to Step 11.		 Go to Step 11.
11  Final Confirmation Test  
  1. Clear DTC if any.
  2. Perform final confirmation test.

Is there any problem symptom, DTC or abnormal condition? 		 Go to Step 6. End.
scientia non olet · About LEMON Manuals