LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, 4WD, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P0500: Vehicle Speed Sensor >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

WARNING:
  • When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
  • Road test should be carried out with 2 persons, a driver and a tester, on a level road.
  1. Connect scan tool to DLC with ignition switch turned OFF.
  2. Turn ON ignition switch and clear DTC, pending DTC and freeze frame data by using scan tool and start engine.
  3. Increase vehicle speed to 80 km/h (50 mph) or more.
  4. Release accelerator pedal and with engine brake applied, keep vehicle coasting for 10 seconds or more and then stop vehicle.
  5. Check pending DTC by using scan tool.
scientia non olet · About LEMON Manuals