LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, 4WD, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Body Electrical Control System >> Diagnostic Information and Procedures >> DTC Clearance >> Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using SUZUKI Scan Tool

  1. Connect SUZUKI scan tool to data link connector in the same manner as when making this connection for DTC check.
  2. Turn ignition switch ON.
  3. Erase DTC according to instructions displayed on scan tool. Refer to scan tool operator's manual for further details.
  4. After completing the clearance, turn ignition switch off and disconnect scan tool from data link connector.
scientia non olet · About LEMON Manuals