Steering Lock Assembly (Ignition Switch) Removal and Installation: Removal

Remove steering column assembly. Refer to STEERING COLUMN REMOVAL AND INSTALLATION .
Using center punch (with sharp point) (1) as shown in figure, loosen and remove steering lock mounting bolts (2).
NOTE: Use care not to damage aluminum part of steering lock body (3) with center punch (1).
Turn ignition key to ACC or ON position and remove steering lock assembly (3) from steering column assembly (4).

Fig 1: Identifying Center Punch, Mounting Bolts, Steering Lock And Column Assembly
Courtesy of SUZUKI OF AMERICA CORP.