Front Door Glass Removal and Installation: Removal

Remove inside handle bezel (1).

Fig 1: Identifying Inside Handle Bezel
Courtesy of SUZUKI OF AMERICA CORP.
Remove door mirror bezel (if equipped).
Remove inside lock knob and door inside pull handle case fitting screw.
Remove window regulator handle (if equipped). To remove regulator handle, pull off snap ring by using a cloth as shown in the figure.

Fig 2: Pulling Off Snap Ring Using A Cloth
Courtesy of SUZUKI OF AMERICA CORP.
Remove door trim (1).
With inside handle bezel (2) tilted as shown in the figure, turn door trim (1) 90° counterclockwise to remove it. And disconnect power window switch lead wire at coupler (if equipped).

Fig 3: Identifying Handle Bezel And Door Trim
Courtesy of SUZUKI OF AMERICA CORP.
Remove door inside pull handle bracket (1).

Fig 4: Identifying Handle Bracket
Courtesy of SUZUKI OF AMERICA CORP.
Remove door sealing cover.
Remove door outside weather-strip (1). Lower window all the way down. Then, use a tape-wrapped putty knife (or screwdriver) to pry off weatherstrip.
CAUTION: Use a tape-wrapped putty knife (or screwdriver) to pry off weather-strip. Use of an unwrapped tool will cause damage to painting.

Fig 5: Identifying Door Outside Weather-Strip & Screws
Courtesy of SUZUKI OF AMERICA CORP.
Remove glass attaching screws (1).

Fig 6: Identifying Glass Attaching Screws
Courtesy of SUZUKI OF AMERICA CORP.
Take out door glass.