LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, 4WD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Repair Instructions >> Oil Pump Disassembly and Assembly >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Pump Disassembly and Assembly: Disassembly

  1. Remove oil pump oil seal (1) by using special tool.
    CAUTION: Be careful not to damage bushing and oil pump body.

    Special Tool 

    (A): 09913-50121 

    Fig 1: Identifying Oil Pump Oil Seal & Special Tool
    G04722720Courtesy of SUZUKI OF AMERICA CORP.
  2. Remove 3 clutch drum oil seal rings (1).
    NOTE: Be careful not to open seal ring more than necessary.
    Fig 2: Identifying Clutch Drum Oil Seal Rings
    G04722721Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove stator shaft assembly (1) from oil pump body by removing 14 bolts.
    Fig 3: Identifying Stator Shaft Assembly
    G04722722Courtesy of SUZUKI OF AMERICA CORP.
  4. Give marks (1) on drive gear (2) and driven gear (3) by using water-proof paint.
  5. Remove drive gear (2) and driven gear (3) from oil pump body.
    Fig 4: Identifying Marks On Drive Gear And Driven Gear
    G04722723Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals