Throttle Position (TP) Sensor Removal and Installation: Installation

Install TP sensor (1) to throttle body (2).
Fit TP sensor (1) to throttle body (2) in such way that its holes are a little away from TP sensor screw holes as shown in the figure and turn TP sensor (1) clockwise so that those holes align.

Tightening torque

TP sensor screw a: 3.5 N.m (0.35 kg-m, 2.5 lb-ft)

Fig 1: Identifying Throttle Position Sensor & Throttle Body
Courtesy of SUZUKI OF AMERICA CORP.
Connect coupler to TP sensor (1) securely.
Connect battery negative cable (-) to battery.