Fuel Pipe Removal and Installation: Removal

Relieve fuel pressure in fuel feed line referring to FUEL PRESSURE RELIEF PROCEDURE .
Disconnect negative (-) cable at battery.
Disconnect fuel pipe joint and fuel hose from fuel pipe at the front and rear of each fuel pipe.
For quick joint (2), disconnect as follows:
1. Remove mud, dust and/or foreign material between pipe (1) and joint by blowing with compressed air.
2. Unlock joint lock by inserting special tool.
  Special Tool
  
  (A): 09919-47020
3. Disconnect joint (2) from pipe (1).
  
  Fig 1: Identifying Joint & Pipe
  Courtesy of SUZUKI OF AMERICA CORP.
Mark the location of clamps on fuel pipes, so that the clamps can be reinstalled in their original locations.
Remove pipes with clamp from vehicle.
Remove clamp from pipes.