LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, 4WD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> Fail-Safe Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fail-Safe Table

When any of the following DTCs is detected, ECM enters fail-safe mode as long as malfunction continues to exist but that mode is canceled when ECM detects normal condition after that.

FAIL-SAFE TABLE

DTC No. Trouble Area Fail-Safe Operation
P0102 
P0103 		 MAF SENSOR
  • Injector drive time (fuel injection volume) is determined according to throttle valve opening and engine speed.
  • EGR valve stops.
  • Air flow of IAC valve is limited.
P0112 
P0113 		 IAT SENSOR Each control is performed on the basis of 22.1°C intake air temp.
P0117 
P0118 		 ECT SENSOR Each control is performed on the basis of 29.9 °C engine coolant temp.
P0122 
P0123 		 TP SENSOR Each control is performed on the basis of 124.5° throttle valve opening.
P0462 / P0463  FUEL LEVEL SENSOR Each control is performed in the basis of full fuel level.
P0500  VEHICLE SPEED SENSOR Air flow of IAC valve is limited.
P2227 
P2228 / P2229 		 BAROMETRIC PRESSURE SENSOR (EVAP LEAK CHECK PRESSURE SENSOR) Each control is performed based on 760 mmHg barometric pressure.
scientia non olet · About LEMON Manuals