LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, 4WD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Fuel System >> Fuel System >> Repair Instructions >> Fuel Injector Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector Removal and Installation: Removal

  1. Relieve fuel pressure in fuel feed line referring to FUEL PRESSURE RELIEF PROCEDURE .
  2. Remove throttle body intake collector referring to THROTTLE BODY AND INTAKE MANIFOLD REMOVAL AND INSTALLATION .
  3. Disconnect fuel feed hose (1) and fuel return hose (2).
  4. Disconnect vacuum hose (4) and fuel return hose from fuel pressure regulator (5).
  5. Remove fuel feed pipe (8) and fuel connect pipe (7) from delivery pipes (6) (right and left).
    CAUTION: A small amount of fuel may be released when it is from delivery pipe. Place a shop cloth under delivery pipe so that released fuel is absorbed in it.
  6. Disconnect connector (3) from each injector.
    Fig 1: Identifying Fuel Feed Hose, Fuel Return Hose, Connector, Vacuum Hose, Delivery Pipes, Fuel Connect Pipe, Fuel Feed Pipe And Fuel Pressure Regulator
    G04721534Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove delivery pipes (1) (right and left) from intake manifold.
  8. Remove fuel injector(s).
    Fig 2: Identifying Delivery Pipes From Intake Manifold
    G04721535Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals