LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> XL-7 Base, 4WD, Automatic >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Brakes - Abs >> Diagnostic Information & Procedures >> DTC Clearance >> Using SUZUKI Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using SUZUKI Scan Tool

  1. Perform the driving test referring to "driving test" under ABS CHECK , if DTC C1015 (DTC 15), C1022 (DTC 22), C1026 (DTC 26), C1032 (DTC 32) or C1036 (DTC 36) is detected.
  2. Connect SUZUKI scan tool to DLC in the same manner as that of DTC check.
  3. Turn ignition switch to ON position.
  4. Clear DTC according to instructions displayed on scan tool. Refer to scan tool operator's manual for further details.
  5. After completing the clearance, turn ignition switch to OFF position and disconnect scan tool from DLC.
  6. Perform driving test referring to "Driving test" under ABS CHECK  and DTC CHECK  and confirm that No DTC is displayed on scan tool.
scientia non olet · About LEMON Manuals