Manifold Pressure/Vacuum Sensor: Service and Repair

Manifold Absolute Pressure (MAP) Sensor Removal and Installation

Removal
1. Disconnect negative cable (-) at battery.
2. Disconnect connector from manifold absolute pressure sensor.
3. Remove manifold absolute pressure sensor from intake manifold.

Installation
Reference: Manifold Absolute Pressure (MAP) Sensor Inspection

1. Confirm that vacuum passage on intake manifold is free from clog.
2. Apply engine oil to O-ring of sensor.
3. Install sensor (1) to intake manifold (2)




4. Connect connector to sensor (1) securely.