P0607

DTC P0607: Internal Control Module Memory Check Sum Error / Control Module Programming Error / Control Module Performance

System Description
Internal control module is installed in ECM.

NOTE: After reprogramming of ECM is executed, if the DTC P0601 and/or P0602 are indicated, it is possible that the reprogramming of ECM is not completed correctly.




DTC Detecting Condition and Trouble Area

DTC Confirmation Procedure
1. Connect scan tool to DLC with ignition switch turned OFF.
2. Turn ON ignition switch and clear DTC by using scan tool, then start engine and run it for 3 min. or more.
3. Check DTC and pending DTC by using scan tool.

Step 1 - 3:

DTC Troubleshooting