Seat Position Sensor: Service and Repair

Seat Position Sensor Removal and Installation

Removal
1. Disconnect negative cable at battery.
2. Disable air bag system referring to Disabling Air Bag System.
3. Remove front seat.
4. Disconnect seat position sensor connector at seat harness.




5. Remove seat position sensor bolt (1) and seat position sensor (2) from seat adjuster.

Installation
Reference: Seat Position Sensor Inspection




1. Install seat position sensor on seat adjuster and tighten seat position sensor bolt to specified torque.

Tightening torque
Seat position sensor bolt a: 8.0 N.m (0.8 kg-m, 6.0 lb-ft)

2. Connect seat position sensor connector at seat harness.
3. Install front seat.
4. Connect negative cable at battery.
5. Enable air bag system referring to Enabling Air Bag System.