Manual A/C

Rear Blower Motor Assembly Inspection
Reference: Rear Blower Motor Assembly Removal and Installation:Manual Type




1. Check continuity between two terminal as shown.
If check results are no continuity, replace rear blower motor assembly (1).

2. Check for operation and current.




a. Fix rear blower motor assembly (1) by using vise.
b. Connect battery to rear blower motor assembly (1) as shown.
c. Check that there is smoothly operates and no noise.
d. Check that ammeter indicates specified current.
If malfunction is found, replace blower motor assembly.

Rear blower fan motor specified current at 12 V
16 A maximum