DTC Troubleshooting
NOTE:
You must obtain all the keys from the vehicle owner before testing any current keys. If a key needs to be replaced, any vehicle keys not programmed during the programming procedure will be inoperative after the programming sequence is completed. Ensure that the doors, hood and trunk/rear hatch are closed prior to starting the programming procedure. If the system is placed in program mode, then the ISU will erase all previously programmed transmitters upon the receipt of the first transmitters programming signal. Do not operate or program the transmitters in the vicinity of other vehicles that are also in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle.
DTC TROUBLESHOOTING - DIAGNOSIS REFERENCE CHART
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| 1 |
Did you find and correct the condition? |
- | System ok | - |