Changing the Fluid

Tools Required: 

DW260-070 Plug Remover/Installer 

1. Raise and suitably support the vehicle.
2. Place a fluid container below the fluid drain plug.
3. Remove the transaxle fluid drain plug using the plug remover/installer DW260-070.

   Tighten: 

   Tighten the Plug to 45 N.m (33 lb-ft).

   Fig 1: Identifying Fluid Drain Plug & Plug Remover/Installer DW260-070

   Courtesy of SUZUKI OF AMERICA CORP.
4. Adding transaxle fluid..
5. Connect the negative battery cable.
   Fig 2: Adding Transaxle Fluid

   Courtesy of SUZUKI OF AMERICA CORP.