Symptom Diagnosis: Malfunction
NOTE:
The faults dealt with here concern transaxle functions such as "traction" (forwards and reverse) and all type of shifts. Entries will not always be made in the fault memory.
Test Steps:
Perform the general checks according to the automatic transaxle diagnostic procedure.
- Test drive
- Check oil level and quality
- Interrogate fault memoryMALFUNCTION PROBLEM SYMPTOM CHART
Symptom Possible Cause Action Malfunction Defective Clutch in Transaxle It There Is Still No Drive With the TCM Disconnected - This is usually due to too little oil being added or to internal leakage.
- Repair is not possible; if necessary, exchange transaxle.
Kick Down Switch Not Functioning Properly - For checking and remedial action, refer to "Emergency/Substitute Program".
Kick Down Switch Not Operating Properly - For checking and remedial action, refer to ENGINE GENERAL INFORMATION AND DIAGNOSIS article.
Vehicle Is in Emergency Mode - For checking and remedial action, refer to "Emergency/Substitute Program".