Rear Shock Absorber Disassembly

Tools Required: 

KM-329-A Spring Compressor 

1. Remove the rear strut assembly from the vehicle. Refer to Rear Strut Removal .
2. Mount the rear strut assembly into the spring compressor KM-329-A. Ensure that the hooks are properly seated.
   Fig 1: Identifying Rear Strut Assembly In Spring Compressor

   Courtesy of SUZUKI OF AMERICA CORP.
3. Compress the spring.
4. Remove the lock nut from the strut dampener rod.
   Fig 2: Identifying Lock Nut & Strut Damper Rod

   Courtesy of SUZUKI OF AMERICA CORP.
5. Release the coil spring from the compressor and remove the rear strut mount, spring upper insulator, dust cover, hollow bumper, coil spring and rear spring lower insulator.
   Fig 3: Identifying Rear Shock Absorber Assembly

   Courtesy of SUZUKI OF AMERICA CORP.