LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Verona Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater And Ventilation >> Repair Instructions >> Blower Resistor Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Blower Resistor Installation

  1. Install the new resistor into the heater/air distributor case with the screws.

    Tighten: 

    Tighten the blower motor resistor screws to 6 N.m (53 lb-in.).

  2. Connect the electrical connector at the resistor.
  3. Connect the negative battery cable.
  4. Confirm the proper performance of the blower.
  5. Install the footwell upper cover. Refer to INSTRUMENT PANEL INSTALLATION .
  6. Install the glove box. Refer to GLOVE BOX INSTALLATION .
    Fig 1: Identifying Blower Resistor & Electrical Connector
    G04720787Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals