Tie-Rod End Removal and Installation: Removal

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Hoist vehicle and remove wheel.
Remove tie-rod end nut (3).

Fig 1: Identifying Tie-Rod End, Knuckle & Nut
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect tie-rod end (1) by using puller (2).

Fig 2: Identifying Tie-Rod And Puller
Courtesy of SUZUKI OF AMERICA CORP.
To facilitate adjustment after installation, put a mark (2) on tie-rod thread indicating position of tie-rod end lock nut (3). Then loosen lock nut (3) and remove tie-rod end (4) from tie-rod (1).

Fig 3: Identifying Tie-Rod, End, Lock Nut & Mark
Courtesy of SUZUKI OF AMERICA CORP.