Keyless Entry Receiver Circuit Check
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
TEST PROCEDURE - KEYLESS ENTRY RECEIVER CIRCUIT
| Terminal | Wire color | Circuit | Specification | Condition |
|---|---|---|---|---|
| G36-1 | BLK | Ground | 0 - 1 V | - |
| G36-2 | BLK/WHT | Lock/Unlock output signal circuit | Figure [A] | Push "Lock" or "Unlock" button on transmitter. |
| 0 - 1 V | Ignition switch is ON position. | |||
| G36-3 | BRN | Enabling signal of programmable transmitter input circuit | 0 - 1 V | Ignition switch is ON position. |
| G36-5 | WHT | Main power supply | 10 - 14 V | - |
Oscilloscope setting
CHI: 5 V / DIV
TIME: 100 ms / DIV