Head lining Removal and Installation: Removal
WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
- Remove overhead console (1) (if equipped) and sunvisor (2).
- Remove room lamp (2), luggage lamp (1) and spot lamp (3) (if equipped).
- Remove sliding roof switch (1) and sliding roof trim (if equipped).
- Remove front side sill scuffs (1), rear side sill scuffs (2), center pillar lower trims (3), center pillar upper trim (4), front pillar upper trims (5), rear luggage mat end garnish (6), rear luggage box (7), rear quarter lower trims (8) and rear quarter upper trims (9).
- Remove rear A/C No.1 duct (1) and rear blower motor switch for H27 engine model.
- Remove assistant grips (1).
- Disconnect rear washer hose and roof harness.
- Remove head lining clips (2) and head lining.
CAUTION:
Do not remove rear A/C No.2 duct (1) from head lining (2). If perform this prohibited service, head lining (2) will be broken.