Rear Wiper Relay Inspection

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative (-) cable from battery.
Remove rear right side inner lower trim.
Remove rear wiper relay (1) from vehicle.

Fig 1: Identifying Rear Wiper Relay
Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no continuity between terminal "c" and "d". If there is continuity, replace relay.
Check that there is continuity between terminal "c" and "e". If there is no continuity, replace relay.
Connect that there is continuity between terminals "c" and "d" when a 12 V battery is connected to terminals "a" and "b".
If malfunction is found, replace it with a new one.

Fig 2: Checking Continuity Between Rear Wiper Relay Terminals
Courtesy of SUZUKI OF AMERICA CORP.