Front Fender Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Remove pad (3) from side body (1) and (or) fender (2), using care not to damage painted surface.

Fig 1: Identifying Pad, Side Body And Fender
Courtesy of SUZUKI OF AMERICA CORP.
Attach new pad (2) cutting appropriately size temporarily and adjust height with a knife (3) so that fender becomes flush with side body (1).

Fig 2: Identifying Pad, Knife And Side Body
Courtesy of SUZUKI OF AMERICA CORP.
Install front fender.
NOTE: If paint on fender bolt is peeled off, be sure to apply paint again.
Install front fender lining.
Install front bumper.