Rear Wheel Speed Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2006 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: REAR WHEEL SPEED SENSOR INSPECTION

Check that no foreign material is attached to sensor and rotor.
Install it by reversing removal procedure.
CAUTION: Do not pull wire harness or twist more than necessary when installing rear wheel speed sensor.

Tightening torque

Rear wheel speed sensor bolt a: 21 N.m (2.1 kg-m, 15.5 lb-ft)

Fig 1: Identifying Clamps And Sensor Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Check that there is no clearance between sensor (1) and knuckle.

Fig 2: Checking Clearance Between Sensor And Knuckle
Courtesy of SUZUKI OF AMERICA CORP.